For workshop & jobsite
A dedicated handhold for large panels.
Plywood is awkward to hold by its thin edge. These top-edge carrier clamps give suitable sheet material a rubber-covered carrying handle.
- ✅ Two matching carriers in each pack
- ✅ For panels up to 1 inch thick
- ✅ Rubber-lined jaws and a soft handle
From the stack to the next task
A practical place to put your hand.
The clamp sits over the panel's top edge. Lifting the handle brings the rubber-lined jaws against the sheet, creating a handhold for carrying.
Keep one near your material stack and the other with your workshop kit. Useful for plywood, drywall and suitable plastic panels within the stated limits.
Check the fit first
Match the jaw to your material.
1 inch max.
The stated clamping range is 0–1 in (0–25.4 mm). Check panel thickness, surface condition and grip before moving it.
Measure the panel at the edge you intend to grip.
A simple sequence
Set the grip. Then make the move.
-
Position
Adjust the jaw opening and place it over the panel's top edge.
-
Lift the handle
Let the rubber-lined jaws engage. Check the grip before carrying.
-
Carry with control
Use a load and panel size you can comfortably manage.
-
Set down & release
Support the panel fully, then lower the handle to release the clamp.
The parts behind the hold
Purposeful materials. A straightforward tool.
-
Nylon clamp jawsThe ribbed jaw bodies form the gripping structure.
-
NBR rubber padsTextured contact faces meet the panel surface.
-
Steel support armsMetal arms connect the jaws to the handle.
-
Rubber comfort gripA softer hand contact point for carrying.
Know what you're choosing
The useful details, in one place.
| Pack contents |
2 matching plywood carrier clamps |
| Color |
Orange handle with black jaws and arms |
| Panel thickness |
0–1 in / 0–25.4 mm |
| Rated capacity |
Up to 200 lb / 90.7 kg per clamp, as stated by the manufacturer |
| Construction |
Nylon jaws, NBR rubber pads, steel support arms and rubber grip |
| Suitable materials |
Plywood, drywall and suitable plastic panels within the stated limits |
The manufacturer's rating applies to each clamp individually. Always choose a load and panel size you can handle and control.
Before you add it to your kit
A few quick answers.
Is this one carrier or two?
This listing is for a two-pack: two matching orange-and-black carrier clamps. Other tools and panels shown in the images are not included.
Will it fit a thick door or worktop?
The stated jaw range is up to 1 inch. Measure the material first; do not assume thicker doors or worktops will fit.
Does lifting the handle grip the panel?
Yes. The handle and jaw mechanism use leverage to press the rubber pads against the panel. Confirm a firm grip on your actual material before carrying.
How do I remove the clamp?
Set the panel down and support it, then lower the handle to release the jaws.
Ready for the next sheet
Put a pair in your workshop.
Choose the 2-Pack option in the product options above. Check your panel thickness and handling needs before you make your next move.
