MANUAL SIPHON PUMP KIT
Transfer Fluid Without Lifting Heavy Containers
Prime the bulb, open the flow valve and move compatible liquids from one container to another with less spilling and less strain.
Manual Primer BulbFlexible 1 m HoseFlow-Control ValvesNo Electricity Needed
MAKE FLUID TRANSFER EASIER → AS SHOWN IN THE VIDEO
From Storage Jug to Equipment in Minutes
The video demonstrates the pump moving liquid between jugs, a mower, a vehicle and outdoor equipment using the same simple squeeze-and-flow method.
QUICK MANUAL PRIMING
Squeeze to Start the Flow
The large rubber bulb creates suction manually, so there is no battery, power cord or complicated setup.
No Electricity
Useful in garages, yards, boats and remote work areas.
Controlled Start
Prime the line by hand before opening the fluid path.
Less Heavy Pouring
Move liquid without repeatedly lifting a full container.
CONTROL THE DIRECTION
Built-In Valves Help Manage the Flow
The valve fittings shown in the video help open, stop and direct the transfer while the hose remains connected.
Start and Stop More Easily
Use the valve controls instead of pulling the hose out mid-transfer.
Secure Hose Connections
Included clamps help reinforce the hose at the fittings.
MADE FOR PRACTICAL JOBS
One Pump for Multiple Transfer Tasks
Suitable for transferring compatible liquids during vehicle care, lawn-equipment maintenance, boating, aquarium work and household projects.
Vehicles
Move compatible fuel or service fluids between approved containers.
Lawn Equipment
Useful for mowers, generators and other outdoor machines.
Water Tasks
Transfer water for aquariums, garden work or household containers.
FLEXIBLE REACH
Route the Hose Where You Need It
The flexible hose reaches between containers and equipment openings while allowing easier positioning in tight work areas.
THREE SIMPLE STEPS
How to Use
1 Connect
Secure the hose and place the inlet end in the source container.
2 Prime
Squeeze the rubber bulb repeatedly until liquid enters the line.
3 Transfer
Open the valve and keep the receiving container lower than the source.
Important: Never siphon by mouth. Confirm that the hose and fittings are compatible with the liquid being transferred. Keep fuel and flammable liquids away from heat, sparks and open flames.
PRODUCT INFORMATION
Specifications
| Product Type | Manual siphon pump kit |
| Operation | Hand-primed rubber bulb |
| Hose Length | Approx. 1 m / 39.4 in |
| Control | Manual flow-control valves |
| Included Parts | Primer bulb, flexible hose, valve fittings and 2 hose clamps |
| Suggested Uses | Compatible fuel, water, oil and other non-corrosive liquids |
| Recommended Settings | Cars, boats, motorcycles, lawn equipment, aquariums and household containers |
Material compatibility, flow rate and exact hose diameter were not confirmed in the supplied information. Check suitability before use.
GOOD TO KNOW
Frequently Asked Questions
Does it need electricity?
No. The rubber primer bulb creates suction manually.
Does the receiving container need to be lower?
Yes. After priming, gravity helps maintain siphon flow when the outlet is below the source liquid level.
Can it transfer fuel?
It is marketed for fuel transfer, but always confirm hose compatibility, use approved containers and follow local fuel-handling rules.
Can I use it for drinking water?
Food-grade or potable-water compatibility was not confirmed, so it should not be assumed safe for drinking water.
SQUEEZE. PRIME. TRANSFER.
Move Liquid With Less Lifting and Less Mess
Keep a practical manual transfer tool ready for vehicles, equipment, boats and household jobs.
