thenuvaroDRIVE GEAR
CLAMP · CHARGE · ROTATE
✦
AUTO-CLAMP WIRELESS CAR MOUNT
Your Phone.
A Better Place.
Clamp, charge and switch your view—from one compact vent mount.
🔒 Auto Clamping🔄 One-Tap Rotation⚡ Up to 15W🌈 RGB Accents
Real product demonstration. Holder requires USB power.
One Tap.
A Fresh Perspective.
Prefer your navigation upright or across the screen? Press the lower-left rotation button to switch between portrait and landscape while the holder is powered.
The motor changes the phone’s orientation. The rear ball joint lets you adjust the viewing angle.
02 POWER FOR EVERYDAY ROUTES
Your Mount.
Your Charging Spot.
Keep a compatible Qi-enabled phone in view while it charges wirelessly. The side arms automatically close around the phone after it is seated in the lower supports; magnetic attraction adds support.
WIRELESS TO YOUR PHONEUp to 15W wireless output. Actual charging output varies by device and power supply.
USB POWER TO YOUR HOLDERConnect the included cable to a suitable USB power source for charging and powered operation. A power adapter is not listed in the included items.
03 THE DAILY SETUP
A Place for Your Phone.
Before You Set Off.
Morning commute or an unfamiliar route—give your phone a consistent place in the cabin, with the charging and viewing features together.
✅ Seat the bottom edge inside the lower supports so the clamp can hold the phone as intended. Set up and adjust the holder while parked.
04 DETAILS WITH A PURPOSE
A Simple Reach.
Two Clear Controls.
LEFT · ROTATETap to change between portrait and landscape.
RIGHT · RELEASETouch the release control to open the side arms for removal.
The silver honeycomb-pattern face, blue lightning emblem and RGB accent strip give the compact black holder its distinctive look.
05 A STRAIGHTFORWARD START
Hook. Power.
Place Your Phone.
Secure the vent clip.
Use the included hook-style clip on a compatible blade-style vent, tighten it and adjust the ball joint.
Connect the holder to USB power.
The cable connects to the holder’s bottom power port.
Seat your compatible phone.
Place its lower edge into the supports and let the side arms close.
Designed for compatible blade-style air vents. The included kit is the vent-mount version shown here.
06 THE FIT DETAILS
A Compact Kit.
A Clear Checklist.
Check your phone and vent before choosing your mount.
Before you buy: Wireless charging requires a Qi-enabled phone. Not compatible with iPhone Pro Max models.
Product specifications
| Phone screen size |
Compatible 4.7–7-inch phones |
| Wireless output |
Up to 15W; device and power-source dependent |
| Mount type |
Hook-style air vent clip; compatible blade-style vents |
| Body height |
4.37 in / 11.1 cm |
| Body width |
2.75 in / 7 cm (body, not extended arm span) |
| Materials |
Plastic and metal |
| Finish |
Black body, silver-pattern face, orange grip accents, RGB lighting |
📦 Included in the kit
-
1× Wireless charging phone holder
-
1× Air vent clip
-
1× USB power cable
Phone not included. One product specification is currently offered.
✧
07 A THOUGHTFUL DAILY UPGRADE
For Someone
Who’s Always Going.
A practical little gift for a commuter, a car-tech fan or someone who likes their everyday setup to feel considered.
🎁 Check their phone model and vent style first. Gift styling is illustrative; gift packaging is not included in the listed kit.
GOOD TO KNOW
A Few Questions,
Cleared Up.
Does the holder need a power cable?
Yes. Wireless charging is between the holder and a compatible phone. The holder itself connects to a suitable USB power source with the included cable.
Will every phone charge at 15W?
No. 15W is the stated maximum. Actual output depends on the phone and power supply. Your phone must support Qi wireless charging.
Does it fit iPhone Pro Max models?
No. This model is listed as not compatible with iPhone Pro Max models, even when a screen size falls within the general range.
Is a dashboard suction base included?
No. The listed kit includes one holder, one air vent clip and one USB power cable. It is the vent-mount version.
Can I keep my phone case on?
Case thickness and case compatibility are not specified for this model. Check your particular phone and case setup before purchase.
How do I change the view or remove my phone?
With the holder powered, use the lower-left control for motorized portrait/landscape rotation and the right touch-release control to open the arms.
READY FOR YOUR EVERYDAY ROUTES
A Tidier Start.
Your Preferred View.
One place for your compatible phone, wireless charging and the view you prefer.
Check the fit details, then choose your mount above.
thenuvaro
