🔧 REMOVE THE FERRULE — NOT THE PIPE
Compression Sleeve Puller Tool for 1/2' & 3/4' Brass Pipes
Remove stubborn compression nuts and ferrules with controlled pulling force — without turning a simple shutoff-valve replacement into a pipe-cutting project.
🔩 Ferrule Removal 📏 1/2' & 3/4' 🛡️ Pipe-Friendly Removal 🧰 Plumbing Repair
🔩 Pull Ferrules
🛡️ Protect Pipe
📏 2 Sizes
🔧 Repair Ready
WHEN THE OLD COMPRESSION RING REFUSES TO MOVE
😤 One Stuck Ferrule Can Turn a 10-Minute Valve Job Into a Fight
Old compression sleeves can grip the supply pipe so tightly that twisting, pulling and grabbing them with ordinary pliers gets you nowhere.
THE REAL PLUMBING PROBLEM
The Valve Comes Off. The Ferrule Doesn't.
🔒 Compression Sleeve Stuck in Place
Years of compression can leave the ferrule tightly seated around the pipe even after the old valve is removed.
🟤 Corrosion Makes It Worse
Age, moisture and mineral buildup can make old compression hardware even harder to move.
⚠️ Aggressive Removal Can Damage the Pipe
Sawing, prying or repeatedly crushing the fitting with pliers can scratch or distort tubing you may still want to reuse.
PULL IT STRAIGHT OFF
🔧 Controlled Pulling Instead of Cutting & Prying
The puller uses mechanical force along the direction of the pipe to help draw stubborn compression hardware toward the open end.
✅ Targets the stuck nut and ferrule
✅ Applies controlled axial pulling force
✅ Reduces the need for destructive cutting
✅ Helps preserve usable supply tubing
KEEP THE PIPE WHEN IT'S STILL GOOD
🛡️ Remove the Old Fitting Without Sacrificing Pipe Length
If the existing supply stub is still serviceable, preserving its shape and length can make installing the replacement fitting much easier.
🚫 No Ferrule Sawing
Avoid deliberately cutting toward the pipe wall.
🔨 Less Prying
Pulling force replaces many improvised leverage methods.
📏 Preserve Length
Avoid unnecessarily shortening an existing supply stub.
TWO COMMON PLUMBING APPLICATIONS
📏 Built for 1/2' & 3/4' Compression Fittings
The kit is designed around two commonly encountered pipe sizes, giving you more flexibility across household plumbing repairs.
1/2' Compression-Fitting Applications
3/4' Compression-Fitting Applications
MADE FOR THE FITTINGS THAT DON'T WANT TO LEAVE
🟤 Tackle Old, Corroded & Frozen Compression Hardware
This is the kind of tool that earns its place in the toolbox when an old supply stop has been sitting untouched for years and the compression sleeve simply refuses to slide off.
🟤 Corroded
For stubborn aging fittings.
🔒 Frozen
For sleeves gripping the pipe tightly.
🔩 Compressed
For rings that won't slide off normally.
SIMPLE MECHANICAL EXTRACTION
🔧 How to Use the Puller
1️⃣ Shut Off the Water Isolate the water supply and relieve pressure before beginning any plumbing repair.
2️⃣ Remove the Old Supply Stop Disconnect and remove the existing valve while leaving the stuck compression nut and sleeve accessible.
