COMPACT OUTDOOR EXTENSION CORD COVER ·
🔌 The Lights Are Up.
Is the Connection Covered?
You’ve planned the lights and arranged the decorations. Finish your setup with protection for the connection that’s easy to overlook.
This compact cover encloses compatible plug connections, helping shield them from splashes and outdoor dirt. A practical finishing touch for patio lights, garden lighting, and seasonal displays.
- 💧 IP44-rated splash protection when properly fitted and closed
- 🔒 Four closing latches keep the housing shut
- 🔌 Rubber end seals and cable clamps help secure the setup
- 🏡 Compact, reusable design for compatible connections
A Little Cover for an Important Connection.
Give your connected plugs a dedicated enclosure instead of leaving the joint exposed. The housing surrounds the connection while the cables exit through rubber seals at each end.
Splash-resistant, not submersible. Keep the enclosure out of standing water. Use with suitable outdoor-rated cords and follow the supplied installation instructions.
Check the Fit. Close With Confidence.
Designed for compatible straight plug connections, this small housing keeps the setup compact. Check both the connected plug size and cable diameter before ordering.
The supplied information lists compatibility with cords up to 14 AWG. Cable thickness and plug shapes vary, so wire gauge alone does not guarantee a fit.
🎄 Finish Your Holiday Setup.
From a glowing front yard to a festive porch, the best-looking displays still have connections behind the scenes.
Add a cover to compatible extension cord joints as you prepare your seasonal lighting. It’s a small detail you can reuse when the next celebration arrives.
Made for More Than One Season.
Patio evenings. Garden displays. Outdoor celebrations. Use the cover wherever a compatible connection needs an added layer of splash protection.
The compact housing fits neatly into your setup without a bulky connection box.
Keep the Cables Seated.
Two internal cable clamps help hold the cords in position inside the housing. Rubber seals at both ends fit around compatible cables.
Once everything is seated correctly, close the cover and secure all four latches.
Four Latches. One Enclosed Connection.
The closing latches hold the lid shut around your connection. Open them when you need access, then refit and close the housing for your next use.
No permanent modification to the plug connection is needed.
Position It to Suit Your Setup.
Two mounting holes provide attachment points for securing the housing in a suitable location. Use the supplied cable ties as directed.
Position the cover away from standing water and avoid placing strain on the cables or connection.
Simple to Set Up.
-
Disconnect power: Make sure the plugs and cords are clean, dry, and undamaged.
-
Position the connection: Place the compatible connected plugs inside the housing.
-
Seat the cables: Position the cords in the clamps and rubber end seals.
-
Close and check: Secure all four latches and check that the lid closes fully without forcing it.
Small Enough to Keep Things Simple.
At approximately 7 × 2 × 2 inches, the housing provides a compact enclosure for suitable plug connections.
Check the usable space inside, not just the exterior size, when matching it to your plugs. Oversized adapters, right-angle connections, and power strips may not fit.
Two Covers for Your Next Setup.
This lets you cover two compatible connections—handy when your lights extend from the porch to the garden.
Keep them with your outdoor lighting supplies so they’re ready when it’s time to decorate.
Product Details
| Included |
2 compact extension cord covers |
| Exterior size |
Approx. 7 × 2 × 2 in / 17.8 × 5.1 × 5.1 cm |
| Listed weight |
Approx. 3 oz / 85 g per cover |
| Protection rating |
IP44; splash-resistant, not submersible |
| Closure |
4 closing latches per cover |
| Cable management |
2 internal cable clamps and rubber end seals |
| Mounting |
2 mounting holes per cover |
| Compatibility |
Suitable straight plug connections; listed for cords up to 14 AWG, subject to cable and plug fit |
Use as directed: This cover does not make indoor-only cords suitable for outdoor use. It does not replace required electrical protection. Keep away from standing water and do not submerge.
Your Questions, Answered
Is it completely waterproof?
It is listed as IP44 and designed for splash protection when correctly fitted and closed. It must not be submerged or placed in standing water.
Will it fit my extension cord?
Check the cable diameter and the full size of the connected plugs. The supplied information lists compatibility with cords up to 14 AWG, but plug shape and cable thickness also determine fit. The latches must close fully without forcing them.
Can I put a power strip inside?
This compact housing is intended for compatible plug-to-plug connections. It is not designed to enclose a power strip.
Can I use it with Christmas or patio lights?
Yes, with compatible connections and suitable outdoor-rated lighting and cords. Follow the instructions for both the cover and the electrical equipment.
Can I reuse the covers?
Yes. Open the latches to access the connection. Before reuse, check the housing, seals, and latches for damage and ensure everything is clean and dry.
Are extension cords included?
No. Extension cords, plugs, lights, and other display equipment shown in the images are not included.
Finish the Setup.
Cover the Connection.
Add a practical finishing touch to your holiday lights, patio, or garden display.
Choose My Cord Covers ↑
