thenuvaroLITTLE PATIO DETAILS
Wood fence light clips · 25 pack
A warmer patio.
A simpler setup.
Put your favorite string lights along your wood fence—without screw holes or adhesive strips. Slide in a clip, settle it on the rail, and loop in the cord.
🛠️ No tools, screws or adhesive🪵 Made for wood privacy fences♻️ Slide out and use again
25 black clips per pack. String lights are not included.
✦
01 / The evening you imagined
Make room for
one more evening.
A fence-side light line gives backyard dinners and quiet patio nights a little more atmosphere. These compact clips let you position your own patio string lights along a compatible wood fence.
Keep the focus on the glow. The clips provide the support; you choose the lights and the mood.
02 / Made around the fenceThe little shape
that does the work.
The I-beam profile uses the space between neighboring pickets. An open hook on the front gives your light cord a place to sit.
-
Guided by the picketsThe slim center slides into the gap, while the flanges sit on opposite faces of the boards.
-
Supported by the railThe clip settles onto the fence's horizontal support rail.
-
A place for the cordLoop a standard patio string light cord into the open hook.
Outdoor-minded material. Made from weather-resistant PETG plastic, with a black finish that sits quietly against a wood fence.
03 / Slide · Seat · LoopTwo hands.
Three simple moves.
Skip the drilling and stick-on mounting. Start with a fence that has the right picket gap and a supporting rail.
Slide between pickets.Insert the clip into the gap between two neighboring boards.
Seat it on the rail.Slide down until the clip rests on the horizontal fence rail.
Loop in the cord.Place your patio light cord into the open hook and continue along the fence.
04 / Choose for your fence
A quick fit check
before you decorate.
Designed for wood privacy fences with side-by-side pickets, a small gap between boards, and a horizontal rail to support the clip.
-
Look for a picket gap.The center of the clip needs space to slide between the boards.
-
Find the supporting rail.The clip rests on the rail rather than fastening into the wood.
-
Match the light cord.Made for standard-gauge patio string light cords, including typical Edison and globe styles.
The details at a glance
| Pack |
25 black light clips |
| Material |
Weather-resistant PETG plastic |
| Approx. size |
1⅜ × 1⅝ × ⅞ in
(35 × 41 × 22 mm) |
| Installation |
Between pickets; rests on a horizontal rail |
| Fence side |
Rail side or front-facing side, where the fit allows |
| In the pack |
Clips only. Lights and other scene accessories are not included. |
Fence gaps and construction vary. Compare your fence with the installation shown before ordering.
05 / Plan the line25 small helpers.
One patio project.
Plan the route first—straight along the fence, gently curved, or draped to suit your space. Position clips where your cord needs support.
25
clips in each pack
At 2 clips per section: about 12 sections, with 1 clip left over.
Start with two clips per fence section. Your fence construction and chosen layout determine the final quantity.
♻️ New season. Same little clips.
Ready to move the lights or take them down? Slide the clips back out and store them for the next setup. There are no screws to remove or adhesive strips to replace.
06 / For the backyard peopleA small idea
for their new place.
For the friend who loves a patio project or the couple settling into a new home: a practical detail that helps them put their own lights where they want them. 🏡
A useful housewarming idea for someone with a compatible wood fence and their own patio lights.
A few things to knowBefore the lights go up.
What exactly comes in the pack?
25 black PETG fence light clips. String lights, furniture and other styled accessories are not included.
Will they fit any fence?
They are designed for wood privacy fences with neighboring pickets, a small gap between the boards, and a horizontal support rail. Check that your fence matches the installation shown.
Can I use either side of the fence?
Yes, the design can be used on the rail side or the front-facing side, as long as the gap and rail allow the clip to seat properly.
Which light cords do they hold?
Standard-gauge patio string light cords, such as typical Edison and globe string light cords. The cord loops into the open hook.
How many clips will I need?
Start with two clips per fence section. A 25-pack covers about 12 sections at that spacing. Adjust the quantity to your fence and layout.
Can I take them down and reuse them?
Yes. Slide the clips out when you change the arrangement or pack away the lights, then store them for another setup.
Let the
evening linger.
Check your fence fit, choose your 25-pack, and bring your own favorite lights.
thenuvaro
✧
